I was finishing up sanding a few freshly primed wood supports when I came across an old project I started about two years ago. I had cut up the solid wood top of an unused drawing table to use part of it for another project and was left with a 22×15 inch panel that seemed to have potential. I decided to use wood carving tools to carve a series of grooves into the wood, then pushed magenta ink into those cracks and wiped the top surface down (kind of like inking an etching). I then filled the cracks and covered the entire surface with about 1/8 inch of resin. This is where i stopped (my original plan was to layer further groove/fills, but I put the panel aside).
Upon seeing that board again, i had an urge to paint over it because i’ve found that starting with an old painting seems to work well for me right now. I took the panel outside and sanded the resin down to a paintable surface with 150 grit, wiped off all the dust, then got busy.
Using a photo I took from above Sky Pond, I started with a pencil sketch. Feeling the momentum, I decided to white out the sky as a base, then make some green marks. I really like where this is headed, it’s got a lot of potential and it feels right.Leave a Comment