Tag: big guns
-
Big Guns, COMPLETE!
I finally finished restoring this Big Guns pinball machine after over a year of effort. When i started I knew very little about pinball restoration and maintenance, and now I know a whole lot more! I wish i had more representative “before” photos, but hopefully some of these give an idea about where this started…
-
Big Guns: assembly complete!
Joy of joys. It’s still not working, but it’s very very close – depends on how quickly I can get good advice from Pinside. I have problems with the kicker switches (which I must have gotten wrong) and the right canon switch (which appears to be missing a diode).
-
Big Guns even closer
At this point i have everything back on the playfield with the exception of the flipper bats, large wireforms that catch the cannon blasts, and the lighted panel that goes behind in the back. It’s crazy that at this point i can write a list of things remaining to do and it fits in a…
-
Repopulating is the fun part
Repopulating the playfield is very satisfying. It’s fun to see all the new and cleaned and polished parts go back on. I’ve got the entire first layer done with the exception of the back center. As usual, there were some difficulties here and there. The main issue was that I discovered a few playfield post…
-
Big Guns board work
Replaced the blown TIP102 on the board and also fixed the backbox GI. Everything tested out good. The GI fix was a bit of a hack but I can make it right later (it’s not dangerous). Waxed the playfield twice, replaced topside light sockets, and put the remaining bulbs in. Touched up the apron and…
-
Soldering night
Did a bunch of soldering on Big Guns. Both front flippers rebuilt and reinstalled, top side mechs rebuilt and reinstalled. Resoldered some bad connections on the topside GI as well. It’s basically ready to be repopulated.
-
Big Guns flipper rebuilds
Top flippers rebuilt and installed, upgraded to fliptronics style thanks to Vid’s guide on Pinside. I’ve got the old flipper bats in upside down to keep everything in place for now. Two more flipper rebuilds to go! Unfortunately the next ones have more switches. I wish I was faster with these!
-
A big weekend for Big Guns
A lot has happened since my last post. I’ll break it down by category. BackboxI finished my last coat of semi-gloss and completely repopulated the backbox. Reinstalled the boards and connectors, the speakers, trims, and translite. This thing is enormous and heavy, but i managed to get it installed on top of the cabinet by…
-
Big Guns backbox stripes complete
Finished painting Big Guns backbox stripes. Three coats of semi gloss to go, then I will repopulate it. Also completed the remaining board/wiring repairs for everything that goes inside this. I should have it back on top of the cabinet and the machine powered up by Sunday! I also spent some more time evaluating the…