Tag: cabinet
-
Big Guns: tilt mech & coin door reassembled
The coin door took longer than expected. First I had to clean the wire harness and everything attached to it. I didn’t take very many pictures of the teardown (big mistake), mostly just the finished wiring. It was like putting together a jigsaw puzzle, but I’m confident it’s done correctly. I need to dig up…
-
Fixing the cabinet floor
Installed the bottom of the cabinet. Glued it in place and screwed in 6 places. I made a couple of mistakes when creating this new panel for the bottom but they are purely cosmetic. It isn’t perfect but it’s good and solid and the imperfections won’t be seen by anyone. Very exciting to get to…
-
Spraying!
Took advantage of the windless evening and sprayed paint for about three hours. 4 coats gloss black on the cab, gloss black on the transformer, and 3 coats textured black on the coin door. At the rate I’m progressing I should have the cabinet stencils painted and the cab reassembled in 2-3 weeks. Exciting!
-
Big Guns cabinet paint prep
I ended up spray priming the cabinet last night, but there were a couple places that I filled with putty and forgot to sand down, so I finished sanding those spots out and would have finished priming too if it weren’t for the heavy mist outside. I sanded out the coin door parts and nailed…
-
Cabinet repair and prime
It’s not perfect, but I’m really pleased with the patch job I gave the Big Guns cabinet. Sanded the KwikWood out today and managed to get it primed. There are one or two places I need to fill some more, then I can finally start repainting it.