thinking & making
-
I don’t enjoy polishing metal
Something about polishing metal like this annoys me, but it sure looks good. These will still get hit with mother’s, then waxed. Waxed the playfield three times too while I was doing these. Lots more metal to go.
-
Taxi restore: It’s all over under there
The underside of the playfield is 99% complete. All the mechs are in and wires soldered. Gonna clean and wax the playfield before completing the flipper installation. I’ve taken this machine further than any other restore so far, though I won’t be doing much to the outside of the cabinet even though it’s a bit…
-
Microswitch nightmares
Took me 45 minutes to reinstall two microswitches on Taxi tonight. Actually, it took me 40 minutes to install one microswitch and 5 for the other. Hopefully the other 6 go faster!
-
New Funhouse shooters
Replaced everything but the plates on both Funhouse shooters – the existing stuff was super gummed up and the left rod looked like a soccer ball. Now both shooters are consistent and much better aligned.
-
Taxi: under playfield clean-up
I’ve basically cleaned everything under the playfield but the light sockets. Ordered some parts I needed to finish the pops, and in the meantime I’ve been cleaning metal from the cabinet (grills, etc). I’ll actually be repopulating by next week! Also, I love my space.
-
Taxi: Very clean mechs
I’ve been taking my time rebuilding most of the mechs on this machine. There are a few more kickers to do that are still under the playfield, and of course the pops, but the big ones are done. I figured out a solution for finding all the through holes in the playfield that were covered…
-
Taxi drop targets done
Drops done, slingshots are next. Unfortunately, I have to replace the sling switches because they are totally jacked up and covered with some kind of clear coat.
-
Orange and Apple on panel
I made these two small paintings on panel for a show. I used a map of Indianapolis in the background for the apple painting and affectionately called it “Indianapplis.”
-
Taxi flippers rebuilt
These rebuilt flipper mechs get me so excited! Drop targets aren’t back together but all the parts are clean so I’ll finish those tonight.